61 61 Windscreen Wipers
WINDSCREEN WIPERS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ Wiper motor secured to wiper bracket | E52 | M6 | 9.9 Nm | |
| 2AZ Parked position stop to wiper console | ||||
| 3AZ Wiper contact pressure motor to wiper console | ||||
| 4AZ Motor crank to wiper motor | E52 | M8 | 27 Nm | |
| 5AZ Wiper shaft nut to body | ||||
| 6AZ Wiper bracket to firewall | E52/E53/E60/E61/E63/E64/E65/E66/E67/E70/E71/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 | M6 | If necessary, observe tightening sequence. | 10 Nm |
| 7AZ Wiper bracket to rubber buffer | E53 | M6 | 10 Nm | |
| 8AZ Wiper arms | E53 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. |
30 Nm | |
| 9AZ Wiper arms | E52 | 27 Nm | ||
| 10AZ Adjusting screw, wiper arm, right side | E65/E66/E67 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. |
30 Nm | |
| 11AZ Wiper arms | E85/E86 | 25 Nm | ||
| E90/E91/E92/E93 | M10 | 30 Nm | ||
| E70/E71/E81/E82/E87/E88 | M10 | 35 Nm | ||
| 12AZ Wiper arm, left side | E60/E61/E63/E64 | M10 | For torque, see inscription on wiper arm. Due to risk of releasing: check TT after approx. 50 mins. settling time. |
30 or 35 Nm |
| E65/E66/E67 | M10 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. |
45 Nm | |
| 13AZ Wiper arm, right side | E60/E61/E63/E64 | 2xM8 | For torque, see inscription on wiper arm. Due to risk of releasing: check TT after approx. 50 mins. settling time. |
20 Nm |
| E60/E61/E63/E64 | 1xM8 1xM10 |
Wiper arm without torque label. | 17 or 35 Nm | |
| E65/E66/E67 | M10 | Due to risk of releasing: check tightening torque after approx. 15 mins. settling time. |
35 Nm | |
| 14AZ Adjusting screw, wiper arm, right side | E60/E61/E63/E64 | 20 Nm | ||
| 15AZ Bearing block tension strut/cowl panel | E60/E61/E63/E64 | 24 Nm | ||
| 16AZ Nut to deflection lever | E65/E66/E67 | M10 | 30 Nm |