LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> General Electrical System - Repair >> Control Units, Modules, Sensors, Aerials >> 61 35 975 Removing and installing/replacing bumper aerial/antenna for Comfort Access System

61 35 975 Removing and installing/replacing bumper aerial/antenna for Comfort Access System

Necessary preliminary tasks: 

Reach in middle behind bumper trim at rear and disconnect plug connection (1).

Unlock catches (2) and feed bumper aerial/antenna for comfort access system (3) in direction of arrow out of holder.

Installation: 

Make sure bumper aerial/antenna for comfort access system (3) is correctly seated and engaged in holder.

Fig 1: Unlock Catches (2) And Feed Bumper Aerial/Antenna For Comfort Access System (3) In Direction Of Arrow
G06213558Courtesy of BMW OF NORTH AMERICA, INC.