Test step 2 - after charging the battery
STARTING CAPABILITY RESULT REFERENCE
| Charge condition 1) | Starting capability 2) | Test result |
|---|---|---|
| Not testable | Defective | |
| less than 50 % | less than 75 % | Charge |
| more than 50 % | more than 75 % | Charge |
- Charge condition and starting power must always be evaluated together
- When test charging for more than 5 hours, use charger Gossen CG 32 or Siemens/Gossen VB 801
- Fully charge until charge state is more than 80 %.
NOTE:
If battery was checked on the positive terminal in the engine compartment, repeat check directly on battery for sake of safety.