63 99 312 Replacing bulb(s) for left or right rear light (on rear lid/USA)

Necessary preliminary tasks: 

• Remove socket housing for rear light  , see 63 21 057 Replacing a socket housing for left or right rear light (on rear lid) .

Press bulb (1) in direction of socket housing for tail light/brake force display (2), turn in direction of arrow and remove from socket housing for tail light/adaptive brake light force display (2).

Installation: 

Note type of bulb  , see 63 21 REAR LIGHT UNIT E71 .

Fig 1: Pressing Bulb Of Socket Housing

Courtesy of BMW OF NORTH AMERICA, INC.