63 31 193 Replacing LED for rear inside door opener

Necessary preliminary tasks: 

• Remove rear door trim  , see 51 42 000 REMOVING AND INSTALLING (REPLACING) REAR LEFT OR RIGHT DOOR TRIM PANEL .

Detach wiring harness holder (1) and insulating tape (2) from door trim panel (3).

Unclip LED for inside door opener (4) in direction of arrow from door opener (5) and remove.

Installation: 

Make sure LED for inside door opener (4) is correctly seated on door opener (5).

Fig 1: Detaching Wiring Harness Holder And Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.