LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2013
>>
X6 50i
>>
Repair and Diagnosis (Single Page)
>>
Accessories & Equipment
>>
Interior/Exterior Trim
>>
Body Equipment - Repair
>>
Front And Rear Window
>>
51 31... Removing windscreen with "Roll Out 2000"
>>
Pulling cutting wire into car
Pulling cutting wire into car
Cut off wire end (1) at an angle and thus pierce adhesive bead (2).
Wire end must be bent to window glass.
Fig 1: Cutting Off Wire End At An Angle And Thus Pierce Adhesive Bead
Courtesy of BMW OF NORTH AMERICA, INC.