Special tool for crimping
Double flat spring contact:
Crimping tool special tool 61 0 202 (crimping tool) with special tool 61 0 230 (matrix)
SPECIAL TOOL SPECIFICATION
| (09/2006 - 03/2009) | |||
|---|---|---|---|
| Previously AHM3(+) | New AHM4R | ||
| Pin no. | Contact (mm2 ) | Pin no. | Contact (mm2 ) |
| 1 | 2.8 | 13 | 2.8 |
| 2 | 2.8 | 20 | 2.8 |
| 3 | 0.63 | - | - |
| 4 | 0.63 | 17 | 0.63 |
| 5 | 0.63 | 2 | 0.63 |
| 6 | 0.63 | 3 | 0.63 |
| 7 | 0.63 | 11 | 0.63 |
| 8 | 0.63 | 9 | 0.63 |
| 9 | 0.63 | 10 | 0.63 |
| 10 | 0.63 | 18 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 11 | 0.63 | 14 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 12 | 0.63 | 15 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 13 | 0.63 | 19 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 14 | 0.63 | 12 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 15 | 0.63 | 16 | 0.63 |
| 16 | 0.63 | 1 | 2.8 |
| Recrimp contact from 0.63 mm2 to 2.8 mm2 | |||
| - | - | 4-8 | 0.63 |
Carry out VEHICLE PROGRAMMING/CODING .