63 31 170 Removing and installing/replacing door handle light on left or right front door

IMPORTANT: Read and comply with notes on handling wiring harnesses and cables, see 61 00... NOTES ON HANDLING WIRING HARNESSES AND CABLES .

Necessary preliminary tasks:

NOTE: Work is shown on the E81 by way of example. There may be differences in detail in the case of other vehicle models.

NOTE: Inner door panel partially shown transparent.

Disconnect plug connection (1).

Release all attachment points of wiring harness (2).

Raise door handle light (4) slightly and remove in outward direction from carrier for outside door handle (3).

Fig 1: Identifying Wiring Harness And Door Handle Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure door handle light (1) is correctly positioned in area (2).

Guides (3) of door handle light (1) must be seated in carrier for outside door handle (4).

Fig 2: Identifying Guides Of Door Handle Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Wiring harness holders (2) of wiring harness (1) must not be damaged or missing.

Replacement:

If necessary, undo loop (3) to obtain the required cable length.

Fig 3: Identifying Wiring Harness Holders And Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.