62 30 010 Removing and installing/replacing headup display

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection see 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) ).

IMPORTANT: Comply with notes and instructions on handling optical waveguides , see 61 00 ... NOTES ON HANDLING OPTICAL FIBERS .
Risk of damage!
Do not scratch lens of head-up display.

Necessary preliminary tasks:

Remove instrument panel trim , see 51 45 031 REPLACING INSTRUMENT PANEL TRIM .
E71:

Remove windscreen air duct , see 64 22 ... REMOVING AND INSTALLING WINDSCREEN AIR DUCT .

Remove sound insulation (1) from head-up display.

Disconnect plug connection (2).

Release screws (3). Tightening torque 62 30 2AZ , see 62 30 HEAD-UP DISPLAY .

Carefully feed out head-up display towards top.

Installation:

Clean lens of head-up display.

Adjust head-up display , see 62 30 517 Adjusting head-up display .

Fig 1: Identifying Sound Insulation, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding .