65 50... Removing and installing/replacing trim for rear cabin monitor base in middle

Special tools required:

IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in color.

Move rear cabin monitor (1) into position illustrated.

Fig 1: Identifying Rear Cabin Monitor And Trims

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove trim (2) in downward direction.

Fig 2: Identifying Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged

Fig 3: Identifying Lugs Location

Courtesy of BMW OF NORTH AMERICA, INC.