65 24 030 Removing and installing/replacing TV amplifier

Necessary preliminary tasks: 

• Remove rear bumper trim  , see 51 12 156 REMOVING AND INSTALLING REAR BUMPER TRIM .

Feed aerial/antenna (1) out of guides (3) and through opening (2).

Installation: 

Make sure aerial/antenna is laid correctly.

Fig 1: Identifying Antenna And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2) and remove TV amplifier (3).

Fig 2: Identifying TV Amplifier, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.