51 13 280 Removing and installing/replacing trim strip on roof frame at left or right: Notes

Special tools required: 

• 00 9 321  , see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Necessary preliminary tasks: 

• If necessary, remove railing, see 51 13 305 Removing and installing/replacing left or right rail .

Lever out trim strip (1) with special tool 00 9 321  starting at rear.

Unclip trim strip (1) up to front and if necessary pull out of seal (2) towards rear.

Installation: 

Catches (1) of clips (2) must not be damaged.

If necessary, replace clips (2).

Installation: 

Following parts of trim strip (3) must not be damaged or missing:

1. Seals
2. End piece, front/rear