LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair >> Roof Trim Panel >> 51 44 011 Removing and installing/replacing roofliner (version with slide/tilt sunroof) >> Replacement

51 44 011 Removing and installing/replacing roofliner (version with slide/tilt sunroof): Replacement

Version with roller combination (dividing net): 

Cut out premarked cutout areas (1) for left/right dividing net mounts with a scalpel.

IMPORTANT: Ensure a clean cut so that the headliner material is not damaged on the inside.
Fig 1: Identifying Premarked Cutout Areas
G04791798Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Installation sequence:

  1. Secure roof liner with mucket
  2. Secure roofliner at front to clips
  3. Snap roofliner at rear into clip
  4. Secure expander rivets to roofliner at front
  5. Screw rear roofliner firmly onto D-pillar
  6. Screw down sun visors and counter supports
  7. Screw down coat hook holder
  8. Add final details to vehicle