51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right
Special tools required:
- 00 9 317
- 00 9 324 MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS
IMPORTANT:
Observe procedure
for using special tool 00 9 324
, see 51 21... Removing window cavity cover strip with special tool 00 9 324 at front or rear .
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).
At same time raise window cavity cover strip (1) with special tool 00 9 317 in area of B-pillar.