61 31 336 Removing and installing/replacing trim for gear selector switch

Necessary preliminary tasks: 

• Remove center console trim, see 51 16 160 Removing and installing/replacing center console trim (gear selector switch) .

Release screws (1) and raise trim for gear selector switch (2) slightly. Tightening torque 61 31 3AZ  , see 61 31 SWITCH .

Disconnect plug connection underneath and remove trim for gear selector switch (2).

Fig 1: Identifying Screws, Gear Selector Switch And Gear Selector Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove switch for electromechanical parking brake  , see 61 31 172 REMOVING AND INSTALLING/REPLACING SWITCH FOR ELECTROMECHANICAL PARKING BRAKE .