51 16 041 Removing and installing/replacing cover cap on left or right exterior mirror

Necessary preliminary tasks:

Fold exterior mirror (1) forwards.

Release screws (2).

Fig 1: Identifying Exterior Mirror And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover cap (1) towards rear.

Installation:

Make sure cover cap (1) is correctly seated in areas (A and B).

Fig 2: Identifying Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover cap (1) towards rear.

Installation:

Make sure cover cap (1) is correctly seated in areas (A and B).

Fig 3: Identifying Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Fold exterior mirror (1) back.

Lift cover cap (2) downwards over catch (3).

Feed cover cap (2) in direction of arrow out of exterior mirror (1).

NOTE: Cover cap (2) must be bent slightly during removal.

Fig 4: Identifying Exterior Mirror, Cover Cap And Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Version with exterior mirror camera (1) only:

Unfasten plug connection (2) and disconnect.

Fig 5: Identifying Connector For Exterior Mirror Camera

Courtesy of BMW OF NORTH AMERICA, INC.