LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair >> Front Lid Insulation Lining >> 51 48... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

ADHESIVE APPLICATION REFERENCE CHART

Adhesive Cleaning
  1. Butyl bead applied to sound insulation with protective film
  2. Butyl mini-round profile Ø 3 mm from the roller
  3. Butyl round profile Ø 6 mm from the roller
  1. Cleaning agent R2

    Under no circumstances: paint thinning 

  2. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
  3. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals