51 33 000 Removing and installing (replacing) power window unit in left or right front door: Notes

NOTE: When removing door lock, snap door window glass out only, do not remove, secure in door window frame.

Necessary preliminary tasks:

Release cable in area (A) from holder.

Release nuts (1) and feed out rear section of power window unit (2).

Tightening torque 51 33 1AZ , see 51 33 POWER WINDOWS, FRONT .

Fig 1: Identifying Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and feed out front section of power window unit (2).

Tightening torque 51 33 1AZ , see 51 33 POWER WINDOWS, FRONT .

Fig 2: Identifying Nuts And Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.