51 47 126 Replacing handle on panel for luggage compartment floor

Release screws (1).

Separate both handle halves (3) from each other at catches (2).

Fig 1: Identifying Handle Halves And Catches With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lever (2) and spring (5) on handle recess (1) must not be missing or damaged.

Removing lock cylinder:

Remove lever (2).

Release catches (4) and remove lock cylinder (3).

Fig 2: Identifying Spring And Handle Recess With Lock Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on handle recess (1) must not be missing or damaged:

2 Fastener

3 Springs

4 Catches

Fig 3: Identifying Handle Recess And Catches

Courtesy of BMW OF NORTH AMERICA, INC.