65 24 020 Removing and installing/replacing blocking circuit (left or right)

Necessary preliminary tasks: 

• Partially remove roofliner  , see 51 44 001 REMOVING AND INSTALLING/REPLACING ROOFLINER (VERSION WITHOUT SLIDE/TILT SUNROOF) or 51 44 011 REMOVING AND INSTALLING/REPLACING ROOFLINER (VERSION WITH SLIDE/TILT SUNROOF) in working area.

Roofliner shown completely removed for purposes of clarity.

Disconnect plug connections (2).

Release screw (1) and remove blocking circuit (3).

Fig 1: Identifying Blocking Circuit, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Fit blocking circuit (1) so that screw (2) engages thread (3) and locating pin (4) engages bore (5).

Fig 2: Identifying Locating Pin, Engages Bore And Screws

Courtesy of BMW OF NORTH AMERICA, INC.