65 20 035 Removing and installing/replacing roof-mounted aerial

Necessary preliminary tasks: 

• Detach empty housing  for roof-mounted aerial, see 65 20 030 Removing and installing/replacing empty housing for roof-mounted aerial .

Release screw (1) and feed out roof aerial (2) towards top.

Fig 1: Identifying Feed Out Roof Aerial And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove aerial (2).

Fig 2: Identifying Plug Connections And Aerial

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: 

• Stick on empty housing  for roof-mounted aerial, see 65 20 030 Removing and installing/replacing empty housing for roof-mounted aerial .