11 21 Crankshaft And Bearings
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | ||||
| Torque angle | 45 ° | ||||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | ||
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm | ||