22 11 001 Replacing Right Engine Mount (N63)

Necessary preliminary tasks: 

• Remove engine support arm  . See 22 11 100 REPLACING RIGHT ENGINE SUPPORT ARM (N63) .

Release screws (1) and remove engine mount (2).

Tightening torque. See 22 11 1AZ in ENGINE AND GEARBOX SUSPENSION - TIGHTENING TORQUES (N54, N63) .

Fig 1: Identifying Engine Mount And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Holes (1) in engine mount must point to middle of vehicle.

Fig 2: Identifying Engine Mount Holes

Courtesy of BMW OF NORTH AMERICA, INC.