13 31 Fuel Pump with Drive and Pipes
WARNING: This page is about a different variant/trim than selected.
FUEL PUMP WITH DRIVE AND PIPES - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Fuel pump to engine | All | 12 Nm | ||
| 2AZ | Fuel pipe coupling bolt | All/with K-Jetr. | M8 | 9 Nm | |
| 3AZ | Fuel pipe coupling bolt | All/with K-Jetr. | M12 | 20 Nm | |
| 4AZ | Fuel pipe to pressure regulator | All/with L-Jetr. | 30 Nm | ||
| 5AZ | Return pipe connector to pressure regulator | All/with L-Jetr. | 27 Nm | ||