32 41... Instructions for removing and installing ear clips

Special Tools

32 1 260

Note:

The work steps are show on assorted components.

Ear clip must always be replaced.

To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

Fig 1: Cutting Ear Clamp With Special Tool (32 1 260)

G08527794

Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Fig 2: Identifying Ear Clip

G08527795

Courtesy of BMW OF NORTH AMERICA, INC.

Attach hook fastener and press ear together with special tool 32 1 260 .

Fig 3: Pressing Lock Hook And Ear With Special Tool (32 1 260)

G08527796

Courtesy of BMW OF NORTH AMERICA, INC.

The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.

Fig 4: Cutting Side Edge With Special Tool (32 1 260)

G08527797

Courtesy of BMW OF NORTH AMERICA, INC.

Warning

Gap (A) max. 1 mm!

Fig 5: Identifying Ear Clip Gap Dimensions

G08527798

Courtesy of BMW OF NORTH AMERICA, INC.