65 50 121 Removing and installing rear cabin monitor (complete)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks

Release screws (1) and remove rear cabin monitor with holder (2).

Disconnect associated plug connections and feed out leads.

Tightening torque 65 52 1AZ .

Fig 1: Identifying Rear Cabin Monitor Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Ensure correct cable routing (1) on both sides.

Fig 2: Identifying Cable Routing

Courtesy of BMW OF NORTH AMERICA, INC.