65 13 065 Removing and installing/replacing front speaker carrier (instrument panel)

Special tools required:

Unclip trim (1) from latching mechanisms with special tool 00 9 317 .

Fig 1: Removing Trim From Latching Mechanisms Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove speaker carrier and disconnect associated plug connection.

Fig 2: Identifying Speaker Carrier Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged

Fig 3: Identifying Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Disconnect plug connection (1) and feed out speaker (2).

Fig 4: Identifying Plug Connection And Speaker

Courtesy of BMW OF NORTH AMERICA, INC.