51 43 148 Removing and installing or replacing trim on left or right door pillar (top)

Necessary preliminary tasks

Detach edge protector (1) in area of trim (2).

Pull off trim (2) towards bottom.

Complete removal only:

Release BELT SCREW on front seat.

Feed out belt strap (3) from trim (2).

Fig 1: Identifying Edge Protector, Door Pillar Trim And Belt Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) and clips (2) on trim (3) must not be damaged.

Fig 2: Identifying Door Pillar Trim, Guides And Clips

Courtesy of BMW OF NORTH AMERICA, INC.