51 71 039 Removing and installing/replacing front left or right wheel arch cover (rear section)

Necessary preliminary tasks:

NOTE: Work shown on the X5 3.0d by way of example; there may be differences in detail on other models.

Detach ABS connection box (1).

Fig 1: Identifying ABS Connection Box

Courtesy of BMW OF NORTH AMERICA, INC.

Release expander rivets (1) and nuts (2).

Fig 2: Identifying Expander Rivets And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 and 2).

Feed out wheel arch cover.

Fig 3: Identifying Wheel Arch Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure all covers in wheel arch are correctly seated in relation to each other:

Rear cover (1) overlaps front cover (2)
Cover (4) overlaps rear cover (1)
Cover (3) overlaps covers (2, 4) and rear cover (1) in area (A)

Fig 4: Identifying Rear Cover And Front Cover
Courtesy of BMW OF NORTH AMERICA, INC.

Left side only: