52 26 000 Removing and installing/replacing left or right rear seat (for 3rd seat row)

Right rear seat is removed in the same way as the left rear seat depicted here.

Unclip cover (1) on left and right and remove in direction of arrow.

Installation:

Replace faulty cover.

Fig 1: Disconnecting Cover On Left And Right

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on left and right.

Tightening torque 52 26 10AZ .

Fig 2: Identifying Rear Seat Left And Right Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Remove cover (2) in direction of arrow.

Fig 3: Removing Screw Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Fold rear seat backwards forwards.

Release screws (1).

Tightening torque 52 26 10AZ .

Fig 4: Identifying Rear Seat Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock PLUG CONNECTION (1) and disconnect.

IMPORTANT: Risk of damage!
Cover sill and entrance area with protective covers.

Slide rear seat forwards (guide pin out of guide).

Lift rear seat with a 2nd person helping out of vehicle.

Fig 5: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.