63 99 145 Replacing bulb for left (or right) side lights (xenon headlight)

Turn protective cap (1) in the direction of the arrow and remove from the headlight.

Installation note: 

Protective cap (1) must be correctly engaged.

Check seal.

Replace protective cap (1) if necessary.

Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .

Disconnect plug connection (1).

Turn bulb (2) in direction of arrow and remove from headlight.

Installation note: 

• Make sure bulb (1) is exactly seated in headlight.
• Note BULB TYPE .
  Fig 2: Turning Bulb

  Courtesy of BMW OF NORTH AMERICA, INC.