63 14 120 Removing and installing/replacing rear reflector

Special tools required: 

• 00 9 317
• 00 9 323

Unclip rear reflector (1) with special tool 00 9 323 on right side and press inwards with special tool 00 9 317 .

Remove rear reflector (1) towards rear from rear bumper trim.

Fig 1: Removing Rear Reflector Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) on rear reflector must not be damaged.

If necessary, replace faulty retainer (2).

Fig 2: Identifying Catches And Retainer

Courtesy of BMW OF NORTH AMERICA, INC.