63 31 193 Replacing LED for rear inside door opener

Necessary preliminary tasks

Remove sheathing of wiring harness (1) in area (A).

Cut through wiring harness (1) in area (A) and remove LED for rear inside door opener (2).

Installation:

Adapt length of wiring harness of new LED for rear inside door opener.

Fig 1: Identifying Wiring Harness And Door Opener

Courtesy of BMW OF NORTH AMERICA, INC.

Connect wiring harness of new LED for rear inside door opener using BUTT CONNECTORS to wiring harness (1).

Wrap wiring harness (1) in insulating tape.