63 31 180 Replacing LED for front door trim panel light

Necessary preliminary tasks

NOTE: Operation is shown by way of example on the E70. There may be differences in detail in the case of other vehicle models.

Remove sheathing of wiring harness (1) in area (A).

Cut through wiring harness (1) in area (A) and remove LED for front door trim panel light (2).

Fig 1: Identifying Wiring Harness And Front Door Trim Panel Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Adapt length of wiring harness of new LED for front door trim panel light.

Connect wiring harness of new LED for front door trim panel light using BUTT CONNECTORS to wiring harness (1).

Wrap wiring harness (1) in insulating tape.