65 12 071 Removing and installing/replacing amplifier (HiFi system)
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
NOTE:
Comply with notes and instructions on HANDLING OPTICAL FIBRES
.
Necessary preliminary work:
- Disconnect BATTERY EARTH LEAD .
- Remove FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON LEFT .
Release screw (1).
Disconnect plug connection (2) and slide amplifier (3) in direction of arrow out of bracket.
Installation note:
Tabs (1) must be correctly slid into guide (2).
Check that amplifier (3) is securely seated.
Replacement:
For vehicle with production date up to 09/2010 , carry out conversion in the diagnosis system via path:
- Vehicle
- Conversions
- Conversion hi-fi system
NOTE:
On vehicle with production date after 09/2010
, no vehicle programming / encoding needs to be carried out!