LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X5 M >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Airbag, Audio, Navigation And Anti-Theft - Repair >> Car Communication Computer (CCC) >> 65 83 020 Removing and installing (replacing) Car Information Computer (CIC)

65 83 020 Removing and installing (replacing) Car Information Computer (CIC)

IMPORTANT: Risk of damage!

A hard disk is installed in the Car Information Computer (CIC).

Carry out mechanical work on the CIC and adjacent components with care.

Avoid subjecting the CIC to vibration / shocks.

IMPORTANT: Read and comply with NOTES on protection against electrostatic damage (ESD protection).
NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBRES .

Necessary preliminary work 

IMPORTANT: When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Release screws (1).

Tightening torque 65 11 6AZ .

Feed out car infotainment computer (2) towards front.

Disconnect plug connections and remove car infotainment computer (2).

Fig 1: Identifying Infotainment Computer And Screws
G04792766Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (2)/(3) and disconnect.

Remove CIC (1).

Fig 2: Identifying Plug Connections And CIC
G06886517Courtesy of BMW OF NORTH AMERICA, INC.

Only for US models with satellite tuner: 

When replacing the CIC unit, additional work is required!

Replacement: 

Carry out PROGRAMMING/CODING .