51 12 801 Replacing bracket for rear bumper at left or right

Necessary preliminary tasks 

• Remove REAR BUMPER SIDE SECTION .

Release screws/nuts (1).

Release expander rivets (2) and remove bracket (3).

Tightening torque 51 12 3AZ .

Fig 1: Identifying Expander Rivets, Bracket And Screws/Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guides in area (A) of bracket (2) must not be damaged.

If necessary, replace faulty metal nuts (1) on bracket (2).

Fig 2: Identifying Bracket, Metal Nuts And Guide In Area

Courtesy of BMW OF NORTH AMERICA, INC.