LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X5 M >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair >> Bumper Strip >> 51 15 360 Removing and installing rubbing strip on rear door on left or right >> Fitting rubbing strip

Fitting rubbing strip

Pull off protective film from adhesive tape on rubbing strip (1).

Place rubbing strip (1) over holes (2) in rear door and align.

Fit rubbing strip (1) and press down firmly with special tool 51 0 300 over entire adhesive area.

Fig 1: Identifying Rubbing Strip And Rear Door Holes
G08528890Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals