61 13 042 Replacing distribution box (luggage compartment)

IMPORTANT: Read and comply with notes on HANDLING WIRING HARNESSES AND CABLES .

Necessary preliminary tasks:

Release expanding rivets (1).

Remove insulating mat (2).

Fig 1: Identifying Insulating Mat And Expanding Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release wiring harness fastener (2) on distribution box.

Release screws (3).

Pull distribution box forwards slightly in direction of arrow.

Feed emergency actuator (4) out of distribution box.

Fig 2: Identifying Plug Connection, Wiring Harness Fastener, Emergency Actuator, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 3: Identifying Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove distribution box.

Fig 4: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove fuses and relays.