12 41 Starter and Mounting Parts
WARNING: This page is about a different car, the 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STARTER AND MOUNTING PARTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Starter motor mounting to transmission bell housing | All, except N51, N52, N52K, N53, N54 | 45 Nm | ||
| 2AZ | Support to starter | All | M5 | 5 Nm | |
| 3AZ | Support to crankcase | All | 47 Nm | ||
| 4AZ | Electrical leads to starter | ||||
| All | M5 | 5 Nm | |||
| All | M6 | 7 Nm | |||
| All | M8 | 13 Nm | |||
| 5AZ | Bolt connection, pole tube | All | M6 | 6 Nm | |
| 6AZ | Heat shield to starter motor | M6 | 6 Nm | ||