12 52 Plug connections, terminals, loose parts
WARNING: This page is about a different car, the 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - PLUG CONNECTIONS, TERMINALS, LOOSE PARTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Wiring harness to starter (terminal 50) | M6 | 7.5 Nm | ||
| 2AZ | Wiring harness to alternator B+ | M8 | 19 Nm | ||
| 3AZ | DDE wiring harness pick-off to support point | M6 | 9 Nm | ||
| 4AZ | Injector guide strip to cylinder head cover | 50x19.5 | 2.5 Nm | ||
| 5AZ | Cable duct to cylinder head | M6x12 | 4 Nm | ||
| 6AZ | B+ lead to starter (term. 30) | M8 | 13 Nm | ||
| 7AZ | Battery positive terminal B+ lead | M8 nut | 15 Nm | ||
| M8x14 | 21 Nm | ||||
| M8 | Self-locking | 21 Nm | |||
| Screw with inner star | 13 Nm | ||||
| 8AZ | Corrugated tube holder to cylinder head cover | 50x19.5 | 2.5 Nm | ||
| 9AZ | Ground, engine wiring harness to ground point | M6 | 9 Nm | ||