12 90 Electronics box, wiring harness
WARNING: This page is about a different car, the 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ELECTRONICS BOX, WIRING HARNESS (N55)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Cable channel to cylinder head cover | N55 | 8 Nm | ||
| 2AZ | Earth cable to crankcase lower section | N55 | M8 | Replace aluminum screw. | |
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Earth cable to rear cylinder head | N55 | M6 | 8 Nm | |
| 4AZ | Cable channel to engine block | N55 | M6 | Replace aluminum screws. | 8 Nm |
| 5AZ | Earth cable for ignition coils | N55 | 5 Nm | ||