LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> M3 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2248 (General Electrical System - Repair) >> Windscreen Wipers >> 61 61 100 Removing and installing/replacing both windscreen wiper arms

61 61 100 Removing and installing/replacing both windscreen wiper arms

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

IMPORTANT: After installation CHECK SETTING DIMENSION AND CONTACT ANGLE  of the wiper arm.

Remove caps (1).

Release nuts underneath.

Tightening torque 61 61 2AZ .

Fig 1: Identifying Windscreen Wiper Arms And Caps
G06895140Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Risk of breakage!
Do not bend wiper arm when removing.

Detach windscreen wiper arm with special tool 61 6 060.

IMPORTANT: Danger of loosening!
Observe tightening specifications without fail.
Fig 2: Detaching Windscreen Wiper Arm With Special Tool (61 6 060)
G06895141Courtesy of BMW OF NORTH AMERICA, INC.