51 46026 Removing and installing or replacing front air outlet trim grille
Special tools required:
Necessary preliminary tasks:
- Remove TRIM COVER ON REAR LEFT/RIGHT ROLLOVER PROTECTION SYSTEM .
- Remove UPPER SECTION OF SIDE TRIM PANEL , left/right.
- Tilt backrest forwards.
- Open lid for retractable hardtop, fold in retractable hardtop if necessary.
Lift trim cover (1) out of retainers (2) with special tool 00 9 323 and feed out towards rear.
Installation:
Catches (2) on trim (1) must not be damaged.
Unclip trim cover (1) on left/right forwards.
Pull off cover (1) downwards.
Lever out covers (2) and release screws underneath.
Tightening torque 51 46 5AZ .
Release clips (1).
Release screws (2).
Tightening torque 51 46 5AZ .
Remove seat belts (3) from trim grille (4).
Detach trim grille (4) by lifting upwards.
Installation:
Remove all screws/clips on trim grille (4).
Align trim grille (4) with rollover protection system and secure screws/clips.