63 99... Notes for handling bulbs/bulb light sources (exterior lights)

Disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (ignition device, control unit and xenon bulb) may only be carried out by qualified personnel.

To avoid injury, wear protective goggles and gloves.

Do not look directly and unprotected into the light radiating from the LED.

Disconnect bulbs/light sources from the voltage supply before changing them (lighting system and ignition off).

Do not touch glass bulbs with bare hands, as even the smallest amount of contamination will burn in and reduce bulb service life.

Only touch light bulbs with clean gloves or a clean cloth.

Do not expose light bulbs to mechanical vibrations.

Use only recommended light bulbs.

Follow the light bulb manufacturer's notes without fail.