51 21 301 Removing and installing/replacing window cavity cover strip on outside of front door
Special tools required:
IMPORTANT:
The "INSTRUCTIONS ON FITTING WINDOW GUIDES " serve as the basis for this repair instruction and must be observed without fail.
Necessary preliminary tasks:
- Remove MIRROR ON FRONT DOOR .
Pop catch (1) out of window guide (2) of door.
Pull window guide (2) approx. 30 mm upwards.
Carefully lever window cavity cover strip (3) with special tool 00 9 322 out of door.
Installation:
Catch (1) must not be damaged.
Moisten window cavity cover strip (3) prior to fitting with APPROVED ANTI-FRICTION AGENT .
Window cavity cover strip (3) must be flush at front to door.