LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> M3 2D Convertible, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair -- M3 Convertible >> Floor-Luggage Compartment-Engine Compartment Trim Panels >> 51 47 440 Removing and installing/replacing rear carpet on seat pan

51 47 440 Removing and installing/replacing rear carpet on seat pan

Necessary preliminary tasks: 

Version with central bass speaker: 

E92 only: 

Lever out cap (1).

Release bolt (2).

Tightening torque 72 11 5AZ .

Feed out belt and slide bar.

Installation: 

Make sure slide bar and grommet are correctly positioned.

Check that spacer bushing (3) and rubber ring (4) are in correct position.

Fig 1: Identifying Spacer Bushing, Cap And Bolt
G04752769Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1).

Pull back cable (2) with cable holder (3).

Feed out carpet (4).

Installation: 

Make sure openings for air duct and attachment points are correctly positioned.

Fig 2: Identifying Holder, Cable And Carpet
G04752837Courtesy of BMW OF NORTH AMERICA, INC.