67-1 31 Drive, seat adjustment
TIGHTENING TORQUE SPECIFICATION - DRIVE, SEAT ADJUSTMENT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| Drives, front seat | |||||
| 1AZ | Drive for seat height adjustment to seat | F01/F02/F03/F04/F07/F10 | 8 Nm | ||
| 2AZ | Drive for seat tilt adjustment to seat | F01/F02/F03/F04/F07/F10 | 8 Nm | ||
| 3AZ | Drive for head restraint height adjustment to seat | F01/F02/F03/F04/F07/F10 | 2.5 Nm | ||
| 4AZ | Drive for backrest head adjustment to seat | F01/F02/F03/F04/F07/F10 | 10 Nm | ||
| Drives, rear seat | |||||
| 10AZ | Drive for longitudinal seat adjustment to seat rail | F01/F02/F03/F04/F07 | 7 ± 0.5 Nm | ||
| 11AZ | Flex shaft for longitudinal seat adjustment to seat rail | F01/F02/F03/F04/F07 | 28 ± 3 Nm | ||
| 12AZ | Drive for seat tilt adjustment to seat frame | F01/F02/F03/F04/F07 | 12 ± 1.2 Nm | ||
| 13AZ | Threaded rod to seat tilt adjustment | F01/F02/F03/F04/F07 | 22 ± 3 Nm | ||
| 14AZ | Drive for head restraint height adjustment | F01/F02/F03/F04/F07 | 3.1 ± 0.3 Nm | ||
| 15AZ | Drive for backrest angle adjustment | F01/F02/F03/F04/F07 | 12 ± 1.2 Nm | ||
| 16AZ | Adjusting unit, backrest angle adjustment | F01/F02/F03/F04/F07 | 20 ± 2 Nm | ||