Monitoring criteria
The fault is recognized when the voltage at pedal-travel sensor 2 is < 0.15 V.
Potential problem source(s):
-Defect in wiring harness between DME and accelerator pedal module (M_FWG2, U_FWG2, A_FWG2) Defective accelerator pedal
The fault is recognized when the voltage at pedal-travel sensor 2 is < 0.15 V.
Potential problem source(s):
-Defect in wiring harness between DME and accelerator pedal module (M_FWG2, U_FWG2, A_FWG2) Defective accelerator pedal