65 50 057 Removing and installing/replacing Central Information Display (CID)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work:

Release screws (1).

Tightening torque 2.5 Nm.

Guide out CID (2) in direction of arrow.

Fig 1: Removing CID

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Remove CID (3).

Installation note:

Ensure correct cable routing.

Fig 2: Identifying Plug Connections And CID

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Brackets (1) on CID (2) must be seated correctly in intended dashboard guides.

Fig 3: Identifying CID Brackets

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: